Install ARCH easily and stress-free – step by step
INSTALLATION INSTRUCTIONS ARCH
The wall decoration ARCH is made of Wallstick material. It is a high-quality, self-adhesive fabric that allows for quick and clean installation and, if necessary, easy removal without a trace. The base of Wallstick is a textile surface with a factory-applied adhesive layer. Thanks to modern technology, you can apply the ARCH decoration to any smooth surface: walls, furniture, doors, or glass. It does not stain, does not deform, and does not require additional glue. ARCH is a semi-matte material with a linen texture, fully self-adhesive and repositionable, making installation quick, easy, and hassle-free.
Practical tips before installation
Remember the wall must be:
- Free from defects
- Degreased
- Primed
- Dry
- Free from dust and dirt
#1
Wall preparation
The wall must be smooth, dry, clean, and primed with an appropriate preparation. The wall color should be uniform, without strongly contrasting areas. Freshly applied plasters or freshly painted walls should be left to dry for about three weeks. Ceramic paints, latex paints, and any poorly adhering surfaces should be sanded before priming the wall. To achieve the perfect effect, eliminate all imperfections. An improperly prepared wall may prevent the correct installation of ARCH.
#2
Checking the ARCH
Expand the ARCH on a clean surface and check if the received product matches the order. Ensure that the ARCH is free from manufacturing defects, such as deformations or discolorations. If the ARCH has manufacturing defects, submit a complaint before application. After the installation of the ARCH, there is no possibility to claim factory defects!
step 1
Plan the ARCH on the wall
To accurately install the ARCH in the adhesive area, measure and mark lines using a laser level. The lines marked on the wall will serve to correctly center the pattern. Always start applying the ARCH from the top.
step 2
Installation of ARCH
Starting from the top, peel off about 10 cm of the backing from the adhesive layer of ARCH. Bend the backing, then apply ARCH to the wall so that the level lines align with the markers on the print, and stick the top part of ARCH. Apply ARCH from top to bottom, gradually separating the backing from the adhesive layer. Press the decoration with a squeegee, removing excess air. Regardless of the tool used, the installation should be done carefully to avoid damaging the material.