Install DOTS. easily and stress-free – step by step
Installation instructions for DOTS.
Our Dots are wall decorations designed for easy and intuitive application. With the right materials and a clear installation guide, you can transform your space in just a few moments without the need to hire professionals. On this page, you will find all the necessary tips that will guide you step by step through the installation process. Start creating a unique interior – with ease and satisfaction.
Practical tips before installation
Remember the wall must be:
- Free from defects
- Degreased
- Primed
- Dry
- Free from dust and dirt
#1
Wall preparation
The wall must be smooth, dry, clean, and primed with an appropriate preparation. The color of the wall should be uniform, without strongly contrasting areas. Freshly applied plasters or freshly painted walls should be left to dry for about three weeks. Ceramic paints, latex paints, and any poorly adhering surfaces should be sanded before priming the wall. To achieve the perfect effect, eliminate all imperfections. An improperly prepared wall may prevent the correct installation of DOTS.
#2
Checking DOTS
Expand the DOTS on a clean surface and check if the received product matches the order. Ensure that the DOTS is free from manufacturing defects, such as deformations or discolorations. If the DOTS has manufacturing defects, submit a complaint before application. After the installation of the DOTS, there is no possibility to claim factory defects!
step 1
Plan the DOTS on the wall
To accurately install the DOTS in the place of its adhesion, measure and mark lines using a laser level. The lines marked on the wall will serve to correctly center the pattern. Always start applying the DOTS from the top.
step 2
Installation of DOTS
Starting from the top, peel off about 10cm of the backing from the adhesive layer of DOTS. Bend the backing, then place DOTS against the wall so that the level lines align with the markers on the print and stick part of DOTS to the wall. Apply DOTS from top to bottom, simultaneously separating the backing from the adhesive layer. Press the wallpaper using a squeegee, removing excess air. Regardless of the chosen equipment, the installation should be done carefully to avoid damaging the material.