Install DOTS. Lighting easily and stress-free – step by step
Assembly instructions for DOTS. LIGHTING
DOTS. Lighting is wall decor with integrated lighting, designed with aesthetics and functionality in mind. The thoughtful design and clear assembly instructions allow for simple and safe installation without the need to engage specialists. On this page, you will find all the necessary tips that will guide you step by step through the installation process and allow you to fully enjoy your new interior element.
#1
Practical tips before installation
Before starting the installation of DOTS. Lighting, make sure that the installation site is properly prepared and that all work is carried out in accordance with safety regulations.
Practical tips before installation
Remember:
Before installation, turn off the power in the electrical circuit where the lamp will be installed.
Prepare the necessary tools:
- Drill
- Level
- Screwdriver
- Voltage meter
step 1
Layout of DOTS. Lighting on the wall
Plan the arrangement of DOTS. Lighting on the wall. Using a level or laser level, accurately measure and mark the drilling points. Precise determination of the mounting locations will allow for an aesthetic and even installation of the lamp.
step 2
Installation of DOTS. Lighting
1. Mounting the bracket
Unscrew the flat lamp shade from the mounting bracket. Position the bracket in the chosen location and mark the drilling points. Drill holes in the wall, insert wall plugs, and then screw the bracket in place, ensuring it is mounted securely and evenly.
2. Electrical connection
Check with a meter to ensure the circuit is disconnected from the power supply. Connect the wires coming from the wall to the lamp wires according to the markings. Ensure a solid and safe connection of the wires.
3. Attaching the lamp
Carefully position the lamp onto the mounting bracket. Slide it in and tighten it clockwise until the lamp is securely attached to the wall. Ensure that the DOTS graphic is aligned straight.
4. Function test
Turn on the power in the electrical circuit and check if DOTS. Lighting is functioning correctly.